The constant lack of time pushes for new ways to save it. While smartphones are becoming more energy consuming, their batteries are increasing their capacity. But just as with great power comes great responsibility, so with great capacity comes great charge time. To enable users of mobile devices to quickly bring their devices into proper shape, fast charging systems have been developed, which are designed to reduce the time of "refueling" your smartphone to the minimum possible. This review contains information about the five most common models of fast chargers that you can buy in 2022.
Best Fast Phone Chargers of 2022
1. TOPK B314P
TOPK B314P with support for Qualcomm Quick Charge 3.0 and Qualcomm Quick Charge 2.0 technologies equipped with two USB ports.
With this charger, you can charge your smartphone, tablet, e-cigarette, or any other two devices at the same time.
Quick Charge 3.0 technology will allow you to charge your smartphone from 0% to 80% in just 35 minutes, which is four times faster than using conventional 5W charges, which are usually supplied by manufacturers with mobile devices and gadgets.
The integrated smart chip automatically detects the type of connected device, flexibly adjusts the voltage, current, and allows you to charge the device as quickly and efficiently as possible.
Thanks to the case made of impact-resistant and fire-resistant ABS plastic, you can rest easy leaving your devices to charge without supervision, for example, at night. Also, the charger has several degrees of protection, namely protection against overvoltage, under-voltage, overheating, overcurrent, and short circuit.
Pros:
- Quality: Very durable materials, impact, and fire-resistant.
- Technology: Charger equipped with Qualcomm Quick Charge 3.0 and 2.0 technology.
- Safety: Protection against overvoltage, under-voltage, overheating, overcurrent, and short circuit.
Cons:
- USB ports: only 65W-2 USB-C & 1 USB-A Port
2. Black-Spade Store QC3.0 20W
In short, we have full compliance with the stated characteristics: real power up to 20W, support for fast charging QC3.0, no extraneous noise both in idle and under load.
The form factor is standard, a European plug and a small rectangle. The case is entirely made, as it turned out, of matte plastic and assembled from two halves.
Two USB outputs are located on the upper end of the case. Both are signed and highlighted in different colors, according to their capabilities.
At the seller, this model is available in two colors: black and white.
Pros:
- Design: Very good looking charger.
- Compatibility: Can be used with almost any device.
Cons:
- Power: Output is only 20W.
3. Baseus CCALL-BX02
The Baseus CCALL-BX02 network charger will help you quickly recharge your gadget, no matter where you are: at home or at work. The lightweight and small adapter is compatible with most existing gadgets. With support for Quick Charge 3.0 technology, network charging charges your smartphone up to 50 percent in 30 minutes.
CCALL-BX02 in appearance is no different from the chargers that you can find in the box with a new smartphone. It has a single USB output port, with a maximum output current of 3 A.
For each gadget connected to the connector, network charging automatically determines the optimal parameters that are necessary for its fast and safe charging.
Built-in protection against voltage surges and short circuits, protection against overheating and overload, the use of refractory materials-make the use of this accessory safe.
Pros:
- Design: Very good looking charger.
- Technology: Charger equipped with Qualcomm Quick Charge 3.0 technology.
- Safety: Protection against overvoltage, under-voltage, overheating.
Cons:
- Output: Only one USB port.
4. Hoco C57A
The Hoco C57A Speed charger is designed for charging mobile equipment from the mains with a voltage of 100-240V. The adapter is equipped with USB A and Type C ports, supports PD2.0, QC3.0/QC 2.0, Huawei FCP, and Samsung AFC fast charging standards.
It is also suitable for charging conventional USB devices. Multi-level protection against short circuit, overvoltage, power surges, overheating, and overcharging helps protect connected devices from damage. The Hoco C57A Speed Char is made in a stylish case made of heat-resistant and impact-resistant plastic.
Pros:
- Ports: USB A and Type C ports.
- Compatibility: Supports PD2.0, QC3.0/QC 2.0, Huawei FCP, and Samsung AFC fast charging standards.
Cons:
- Quality: Build quality not great.
5. Elough CL02 Dual USB
Power adapter Elough CL02 Dual USB allows you to quickly and efficiently charge your device at home, in the office, or on the go. This adapter is compatible with all devices.
In appearance Elough Dual USB is just like any other charger with two ports. It has a maximum output current of 2.4 A. It also supports a voltage of 100-240V.
With support for Quick Charge 3.0 and 30W output, you can charge your device up to 50 percent in 30 minutes. And to 100 percent in less than an hour.
Pros:
- Output: 30W and 2.4A
- Safety: Short-circuit protection.
- Compatibility: Can be used with any device.
Cons:
- Design: Only one choice of color.
How to choose a solid fast charger
Some people may get confused about the huge number of chargers that can be found in the store. Especially for you, we have prepared a small guide for choosing a charger.
What connector to choose
If the network device comes with a cable, you need to pay attention to its connector. The two most common connectors now for Android devices are micro-USB and USB Type-C. Apple smartphones, starting with the iPhone 5, are equipped with a Lightning connector.
To find out what kind of connector you have is simple: just look at the technical documents of the smartphone, check the technical specifications on the manufacturer's website.
As a rule, the cables are equipped with a micro-USB, USB Type-C, or Lightning connector on one side, and with a regular USB connector on the other. That is why adapters are universal. The exception is Type-C adapters designed for cables with the same connector on both sides.
Fast chargers
The charging speed depends on two parameters: the charging voltage and the current. Most chargers support a voltage of 5 V, but the output current can be different — from 1 to 2.1 A. Charges the device faster with higher amperage.
We should also highlight the fast charging technology, which is supported by many modern smartphones. The essence of the technology is to maximize the current and thus speed up the charging time. The current, in this case, can be increased to 4.5 A.
Fast charging technologies are different, so you need to choose the technology from the manufacturer of your smartphone.
